Razor Ground Force Go Kart Drive Belt
Calculate Shipping
Zip Code:Province:Country: 
Enter zip code, select country to get shipping rate.
Availability: Out of stock.
If you would like to be notified when this item is available, please click here.
Product Description
Drive belt for the Razor Electric Ground Force Go Kart only. This belt is not for Razor Ground Force that is chain driven. Belt Size: HTD 339-3M-18. The measurement is sometimes printed on the belt in different ways, depending on the belt manufacturer. For example: HTD 339-3M-18, 339-3M/18, 339-3M-18, 3393M18, 339-3M, 3M339, or 3M-339. Other variations are possible, but the belt size is the same. The measurements for the Ground Force Belt indicate the belt is 339 mm long and 18 mm wide with 3 mm tooth spacing.
Please refer to your Owner's Manual for the Ground Force Belt Replacement Procedure (Word Document) or download the manual from the Owner's Manual Section on our web site.
Drive belt for the Razor Electric Ground Force Go Kart only. This belt is not for Razor Ground Force that is chain driven. Belt Size: HTD 339-3M-18. The measurement is sometimes printed on the belt in different ways, depending on the belt manufacturer. For example: HTD 339-3M-18, 339-3M/18, 339-3M-18, 3393M18, 339-3M, 3M339, or 3M-339. Other variations are possible, but the belt size is the same. The measurements for the Ground Force Belt indicate the belt is 339 mm long and 18 mm wide with 3 mm tooth spacing.
Please refer to your Owner's Manual for the Ground Force Belt Replacement Procedure (Word Document) or download the manual from the Owner's Manual Section on our web site.
 |
 |
 |
 |
|
 
|
 |
 |
 |
