Product DescriptionThis part has been discontinued
, please see the 7 Connector Control Module & 4-wire Throttle Electrical Kit
page for the replacement part.
Replacement electrical kit consisting of one 4-wire, variable speed throttle and one 5-connector control module (model # CT-201C6 / HB2430TYD4-FS). Compatible with the following Razor Electric Products:
* Razor e200 /e200S / e225S Scooter - Version 1-12
* Razor e300 /e300s / e325S Scooter - Version 1-10 & 12
* Razor Pocket Mod Scooter - Version 1-12
* Razor Sports Mod Scooter - Version 1+
* Razor e500 Scooter - Version 1+. Please note the e500 control module has been discontinued. This is a work around.
When you install the control module only one brake will connect to the control module. Recommend connecting the rear brake.
If your scooter originally came with a 5-wire, variable speed throttle, this kit will work, but you need to replace both the original throttle and the module with the ones that come in this kit.
Razor Scooter/Bike model versions can be determined by locating your bar code ID on your product. Scooter bar code ID's can be located on the bottom of the scooter or on the stem; The 7th and 8th digit in the series will tell you the version of your product: 01=version 1; 02=version 2; 09=version 9, and so on. Please be sure you identify your product version before placing an order for this electrical kit.